1. You should first open your console using a poker to remove the outer shell.
2. Disconnect all wires (make-sure power is switched off) and move your DVD drive.
3. Next to be removed is the motherboard inside along with the fan.
4. All you need to for this next step is to simply turn the motherboard over onto its back.
5. Now this is where you need to find and locate where the GPU & CPU are. Simply find the heat-sink and gently loosen it and you should then see both of the above mentioned.
6. Both the GPU & CPU are required to be cleaned well enough to be called brand new again.
7. Have you ever heard of a substance called arctic silver compound? Don’t worry, you can find this stuff in almost every computer repair shop. It is around the same price as a candy bar and all you do once you have it is to apply onto the GPU itself. (Always do extremely carefully)
8. Go and have a cup of coffee, because you need to wait for the compound to set. This takes around fifteen minutes, once done you need to put the nylon washers x2 back onto each heat sink screws, proceed by putting the screws back onto your motherboard. Remember to add more washers on top of those screws again.
9. A delicate job of placing the heat-sink back on top the screws is required, once done fasten back down.
10. You’re nearly done. Put everything back in its place by reversing what you have done and enjoy playing your Xbox 360 once again.
Hey hope you can fix it using these tips, if you are still struggling feel free to contact me at gavin.mb99@gmail.com and I will show you where to find a great guide showing you all the help you need in order fix your console for good.
Good Luck.
Suggestion:
You can't, your xbox is knackered now you have the ring of fire.
You must log in to post a comment.